Single Facer which is an important unit of the Plant is sturdy in construction. Reel stands are provided with unwinding shafts for feeding of the plain paper to the single facer and double Baker unit . Brakes are provided to control web of the paper. Take up units provided on single facer, equipped with belts to carry single facer corrugated board on the overhead Bridge. Over head Bridge is mounted on the single facer and reel stand to store the corrugated board. Pre heaters are provided with the single facer and on the overhead Bridge. Prior to the glue unit to preheat the Liner Paper and single face corrugated board for quick Lamination. In order to paste single face corrugated board with liner paper, Glue unit is provided to apply on the top of the corrugated Flutes for Lamination. Thickness of the glue can be adjusted as required. Hot plates are required to dry the glue coated on the corrugated board. The Felts can be lifted from the surface of the hot plates, thereby increasing the life of the felt. Cooling unit is provided with rollers for pressing the the board. A Alitter creases the corrugated sheet sheet to the required length. The cutting of the sheets is controlled by P.I.V gear box to ensure accurate cutting. Belt conveyor is fitted with cut off to take delivery of sheets.